Menu System, Key Assign Menu; General Procedure To Use The Key Assign Menu - Telex KP-812 User Manual

Menu System, Key Assign Menu

Use this menu to assign intercom keys, to adjust listen levels for point-to-point keys and party line keys, to
assign setup pages, to configure quick assign and reset all volumes.

General Procedure to use the Key Assign Menu

1. Using the encoder knob, rotate to Key Assign.
2. Tap the encoder button to enter the menu.
Note: If you do not have a trunking intercom system, skip to step 3.
Remote key assignment only (trunking systems only): If your intercom is trunked, Matrix
displays in the Call waiting window. You must select a remote intercom matrix before assign-
ing intercom keys to destinations in that matrix. You do not need to select an intercom matrix
if you are assigning keys in your own intercom system. Also, do not select an intercom matrix
if you are assigning auto functions or setup pages, or if you are changing listen gains for
remote point-to-point keys or remote party line keys. Select a matrix as follows:
•
•
•
Pt-to-Pt should now display in the Call Waiting window (both for local and remote key assign
ment). This is the list of available point-to-point key assignments.
3. Turn the knob to select a different list as follows:
Pt-to-Pt :
Party Line :
IFB :
Spcl List :
Sys Relay :
Camera ISO :
Groups :
UPL Resrc :
Quick Assign:
Reset Vols :
4. Tap the encoder once to select a list.
In some cases, "Wait" may display while the requested list is uploaded from the intercom
system.
KP-812 Keypanels User Manual
Tap the encoder key once to access the Matrix list.
Turn the encoder knob clockwise to scroll forward, to locate the desired matrix.
Once you have found the matrix, tap the encoder knob once to select it. "Wait" may
display while the scroll lists for that matrix are loading.
Assign a key to talk/listen to another intercom port.
Assign a key to talk/listen to a party line.
Assign a key to talk/listen to an IFB.
Assign a key to talk/listen to a special list.
Assign a key to activate a relay or GPI output.
Assign a key to talk/listen to an ISO.
Assign a key to a group of ports.
Assign a key to activate a UPL resource
Configure the Quick Assign key with Talk/Listen options
Restore the default listen level for keys that have a point-to-point or
party line assignment. (If you select this item, skip the rest of this
procedure and go to "Key Assign Menu, Key Gain".)
39