Table of Contents
Advertisement
Menu, Key Option, Solo
A solo key will cause all other keys to turn off when activated. You can assign one solo key.
1.
Select Solo, then tap the encoder knob.
Tap Key displays
2.
Tap an intercom key. Both LEDs for the key will light red to confirm the assignment.
Tap the key again if you want to remove the assignment.
3.
Hold the encoder knob for 1 second to exit.
Activating the solo key should now cause all other activated keys to turn off. The keys will
turn back on when you turn off the solo key.
4.
Run Service Menu, Save Cfg to store the Solo setting
Note:
The Solo option will continue on a key even if you change key assignments.
Removing the Solo Key Option
1.
Select Solo, then tap the encoder knob.
2.
Tap the solo key to turn off the LEDs.
3.
Hold the encoder knob for 1 second to exit.
The solo key is now cleared.
4.
Run Service Menu, Save Cfg to store the Solo setting
Menu, Key Option, Exclusive
An exclusive key will cause all other keys to turn off when activated. You can assign one
exclusive key.
1.
Select Exclusive, then tap the encoder knob.
Tap Key displays
2.
Tap a key. Both LEDs for the key will light red to confirm the assignment. Tap the key
again if you want to remove the assignment.
3.
Hold the encoder knob for 1 second to exit.
Activating the exclusive key should now cause all other activated keys to turn off. The keys
will NOT turn back on when you turn off the exclusive key.
4.
Run Service Menu, Save Cfg to store the Exclusive setting
Note:
The Exclusive option will continue on a key even if you change key assignments.
Removing the Exclusive Key Option
1.
Select Exclusive, then tap the encoder knob.
2.
Tap the exclusive key to turn off the LEDs.
3.
Hold the encoder knob for 1 second to exit.
The exclusive key is now cleared.
4.
Run Service Menu, Save Cfg to store the Exclusive setting
KP-812 Keypanels User Manual
45
Advertisement
Chapters
Table of Contents
