Telex Azedit Software Manual page 99

11. Select Change Assignment.
The Select Key Assignment screen appears.
12. In the key type list, select the type of intercom key you want to assign (for example, UPL Resource).
13. In the name list (on the right), select a name (alpha) for the key (for example, 5PM).
14. Click OK.
The Selected Key Assignment screen closes and the selected name appears in the key assignment combo
box on the Keypanels / Ports screen.
15. Click UPL.
The User Programmable Logic Statements screen appears.
16. Double-click a UPL Statement.
The Edit UPL Statement screen appears.
17. In the Comment field, enter a description of the UPL statement you are creating (for example, Load 5PM
file from 5PM key). This serves as a reminder of what the UPL statement does.
18. Verify the Enabled checkbox is selected.
19. From the Input A Type drop-down list, select UPL Resource.
This is part of the input condition that has to be met before the UPL statement initiates and loads the setup
file.
Telex Communications
99