Table of Contents
Advertisement
Alternative Method of Assigning Alpha
If you want to change the name for a particular intercom port while you are viewing the keypanel setup screen for that
port, you can use this method for assigning Alphas. However, it is not recommended for assigning multiple alphas to
the intercom system.
To assign alphas to a port while viewing the keypanel setup screen, do the following:
1.
While viewing the keypanel setup screen, press Ctrl + F12.
The Edit Alpha Description screen appears.
2.
In the Description field, enter a description of the Port.
There is a 24-character limit on this field.
3.
In the Alpha field, enter an alpha for the port.
There is a 4-character limit on this field.
Note: The Alpha and Alias fields will be the same, unless you change the Alias field manually.
4.
In the Alias field, enter an alias for the port, if necessary.
There is a 4-character limit on this field.
For more information on Alpha vs. Alias, see the screen description for Alpha and Alias.
Telex Communications
51
Hide quick links:
Advertisement
Table of Contents
