Master Controller Status; Master Controller Versions - Telex Azedit Software Manual

M

Master Controller Status

Use Master Controller Status to view connection status and data communication errors between the master
controller and the configuration PC. You can also use this to upgrade the master controller firmware.
Note: In an ADAM or ADAM CS intercom system this item displays status information about the active master
controller card, and the standby master controller card status can be viewed with the Standby Controller item on the
Status menu.

Master Controller Versions

Use Master Controller Versions to check the Master Controller firmware version. You can also use this to upgrade
the Master Controller firmware.
Maximize
Maximize expands the AZedit window to fill the entire screen.
Merge
Use Merge to combine the contents of a previously saved file into a file that you are currently editing. Typically, use
merge with partial setup files that have been previously saved using partial save.
Merge is available in the File menu and also via the merge button.
Minimize
Minimize closes, but not exits, the AZedit window. The window is reduced to an icon in the taskbar.
Telex Communications
157