Table of Contents
Advertisement
Intercom Configuration
Use Intercom Configuration to view the number of available resources and options, such as intercom ports, party
lines, number of talk levels, etc. In an ADAM or ADAM CS intercom system, you can also use Intercom Configuration
to change the resource and option settings.
Intercom Status Pane
The Intercom Status Pane provides any one of the following indications:
----
LOCL
SLV
configuration is performed via the master frame connection)
CS9X
ADAM
name
a trunking environment (names assigned using CStrunk)
Intercom System Name Pane (Intercom Alpha)
When you are viewing most screens, the Intercom System Name Pane (Intercom Alpha) displays the name of the
intercom system where the currently selected resource is located.
In the keypanel setup view or the LCP-102 setup view, if you move the cursor over an assignment, this pane also
displays the name of the intercom system where that assignment is located.
If your intercom system is not interconnected with any other intercom systems, this pane displays LOCL for all
resources. This indicates that the resource is located in the local intercom system.
If your intercom system is part of a larger trunking* intercom system, then some resources which are being used in
your intercom system may actually be located in a remote intercom system. For example, a key on a keypanel in your
intercom system could be assigned to talk to a person in a remote intercom system. In such cases, this pane displays
the name of the remote intercom system.
ISO
ISO provides access to the ISO (Isolate) setup screen.
ISO Alphas
Use ISO Alphas to assign four character names and up to twenty-four character descriptions to isolates.
Note: You can also change the name for a particular ISO using Ctrl+F12 alpha editing.
No intercom detected
Intercom detected, but type not recognized
Slave frame of a multi-frame ADAM system detected (won't go ONLINE, all system
CS9x00 intercom detected (will not go ONLINE)
ADAM or ADAMCS intercom detected (will only go ONLINE if running AZedit)
The alpha name assigned to an ADAM or ADAM CS intercom system that is operating in
Telex Communications
153
Hide quick links:
Advertisement
Table of Contents
