Telex Azedit Software Manual page 93

Users can construct these statements easily using the drop-down lists on the Edit UPL Statement screen. There are
cases where the actions to be implemented require external devices. For this purpose, RTS has included a serial
RS-232 control language called Command Line Protocol. This protocol allows simple ASCII communications between
the matrix and the external computer. Command Line Protocol comes standard on ADAM, ADAM CS and Zeus
matrices.
In AZedit, the number of UPL's is set in the configuration of the matrix "options" intercom configuration. For Zeus, the
UPL statement limit is set to 128; for ADAM CS, the UPL statement is 256. For a single frame ADAM, the number of
UPL statements is 256, however this is adjustable. The number can be increased, but it may degrade other dynamic
capabilities, such as the number of party lines (this is limited to the amount of memory available on the master
controller card). The available memory test is available when these matrix settings are adjusted. The Allow Intercom
Resizing in Online Mode checkbox must be selected. This is done by going to the Options menu and selecting
Preferences.
Screen Items
Screen Item
UPL Statement
Enabled
Field Type Description
display column
The UPL Statement column displays the number assigned to the UPL
statement.
display column The Enabled column indicates if a statement is enabled to run or
disabled. If the column shows YES, this indicates enabled. If the
column shows NO, this indicated disabled.
To enable or disable the UPL statement, do the following:
1. Right-click the UPL statement you want to enable/disable.
Telex Communications
93