Telex Azedit Software Manual page 58

Setting Up a Party Line
Party lines are primarily set up for party line members, with occasional access by keypanel operators. Party lines are
typically used when several users of non-keypanel devices, such as belt packs or cameras, are used in a specific
common activity and need to talk/listen to each other constantly.
To setup a party line, do the following:
1. Start AZedit.
The AZedit application appears.
2. Click the PL button
The Party Line screen appears.
3. Select the Ports connected to the PL (for example, 001).
4. Click PL Talker or PL Listener.
A "Yes" appears in the appropriate column.
For more information on PL Talker and PL Listener, see the Party Line screen description.
58
Telex Communications