Telex Azedit Software Manual page 95

Assign UPL Alphas
UPL's have default names, 001, 002, etc. You can change the defaults to more meaningful names. You can also
enter a brief description to give further information and keep track of the UPL's that you use.
To assign alphas to multiple UPL's, do the following:
17. In AZedit, click Other Alphas.
The Other Alphas screen appears.
18. From the Other Alphas screen, select ISO Alphas.
The ISO Alphas screen appears.
19. Double-click a UR (UPL resource).
The Edit Alpha Description screen appears.
20. In the Description field, enter a description of the UR (for example, Statement 1). The description field has
a 24-character field limit.
21. In the Alpha field, enter a meaningful name that users would recognize for the UR (for example, ST 1). The
Alpha and Alias fields have a four-character field limit.
Note: The Alias and Alpha fields populate with the same information. You can change the Alias, if
needed. For more information see, the Port Alphas screen description.
22. Click Next to assign another alpha. Otherwise, click Done.
The UR default alpha is changed.
previously canceled with the Undo Button.
Go Back: lets you go back to previously viewed screens
(up to 20).
Go Forward: lets you go forward again when you have
used Go Back to look at previously viewed screens.
Search: From the Search popup menu, you can:
Search for this panel (opens the Search Status Screen)
Search for panels with this key assignment (only
available when a key assignment has been made)(opens
the Search Status Screen)
Show Grid: Opens key assignment grid.
Telex Communications
95