Telex Azedit Software Manual page 100

20. From the Output Action Type drop-down list, select Load File.
A File Name drop-down list appears.
Note: All setup files are kept in the Setup file located in the TELEX folder on your C:\ drive.
21. From the File Name drop down list, select the file that will load (for example, test.adm).
Note: There is a description box near the bottom right that provides an English text description of
what the UPL statement you create will do. This allows you to play around with inputs, outputs, and
operators to see what the effect of each is.
The UPL statement is now created. Once these changes are sent to the intercom system, the setup file prepared
will load when the keypanel key is pressed.
IMPORTANT: Activate SERVER mode. AZedit must be operating in SERVER mode for the intercom system
to be able to load the files. For more information on SERVER mode, see Connecting and Disconnecting.
100
Telex Communications