Telex Azedit Software Manual page 70

IFB Priority Setup
Set the IFB priority when you want to give one user access to the IFB over another user. For example, a director
and an assistant can be setup to communicate with the same IFB. If IFB priority has been set, giving the director a
higher priority than the assistant. Anytime the assistant is communicating with the IFB and the director wants to talk to
the IFB, the assistant will be cut off from the IFB and see a busy signal (double asterisks) on the keypanel display
until the director is finished talking to the IFB.
The default IFB priority setting for all users is one. You can configure the maximum priority level (up to 8 levels). For
more information on how to configure priority levels, see Configure System IFB Priority Levels.
Note: A priority of zero does not allow a port the ability to interrupt an IFB if it is talking with a higher priority.
To set IFB priority for multiple ports, do the following:
1. From the System menu, select IFB Priority.
The IFB Priority screen appears.
2. From the Port list, select the ports you want to set the IFB priority.
3. Under Set priority of selected ports, select the priority to set the ports (for example, 2).
Note: Remember; SEND all your changes to the Intercom System before closing the application.
If the changes are not sent they are not saved to the intercom system.
To set IFB priority for individual ports, do the following:
1. On the Keypanel / Port screen, select the port for which you want to set the priority.
2. Click Edit.
The Keypanel / Port Configuration screen appears.
70
Telex Communications