Right-Click Guide To The Ifb Screen - Telex Azedit Software Manual

Right-Click Guide to the IFB Screen

Built into AZedit are many different ways to get to the same information, by buttons, menus, and right-clicking. The
following is a list of menus and screens you can access by right clicking from the IFB main screen.
Right Click Action
Highlight Port > Right Click
Right-click anywhere on the screen
Result
A popup menu appears that gives you the following
options:
Info: The information contained here shows the IFB
Name, description, default input, output, listen source,
tone override input, and Dim setting.
Scroll Enable: Gives the user the ability to set scroll
enable for Local ports, Trunk ports, AZedit ports.
From the Scroll Enable menu, select Local, Trunk, or
AZedit.
From the Navigation menu, you can:
Go to IFB Priorities View
Go to IFB Listen Source View
Go to IFB Listen Destination View
Go to IFB Alpha View
From the Changes Menu, you can
Clear all changes to this IFB /all IFBs..,.- clears all the
changes you have made up to the last Save
performed.
From the Search menu, you can:
Search for panels with this IFB assigned...
Note: You must be connected to the Intercom
for some of these menus to work.
A popup menu appears that gives you the options to:
Undo: reverses the last action--for example, to undo a
deletion, thus restoring deleted text to a document.
Redo: will redo up to 20 consecutive changes that you
previously canceled with the Undo Button.
Go Back: lets you go back to previously viewed screens
(up to 20).
Go Forward: lets you go forward again when you have
used Go Back to look at previously viewed screens.
Search: From the Search popup menu, you can:
Search for this panel (opens the Search Status Screen)
Search for panels with this key assignment (only
available when a key assignment has been made)(opens
the Search Status Screen)
Show Grid: Opens key assignment grid.
Telex Communications
65