Telex Azedit Software Manual page 130

Enable Trunking
Trunking allows you to connect up to 32 systems together. One reason for a trunked system is to allow for more
users. AZedit has the ability to support trunked systems, however, the application must be configured to accept
trunking.
To enable trunking, do the following:
1. From the Options menu, select Preferences.
The Applications Preferences screen appears.
2. Click the Advanced tab
The Advanced screen appears.
3. Select the Enable Trunking check box.
4. Click Apply.
5. Click OK.
The Application Preferences screen closes.
Trunking is now enabled for AZedit trunking support. You DO NOT need to send this change to the Intercom.
130
Telex Communications