Table of Contents
Advertisement
Restricting Setup Page Reassignment for all Intercom Ports Using Copy and Paste
This procedure shows you how to quickly restrict the setup page for all intercom ports. This will prevent any keypanel
operator at any intercom port from changing the setup page assignments.
To restrict setup page reassignments for all Intercom ports using copy and paste, do the following:
1.
Select the port for which you want to work.
2.
On the Keypanels / Ports screen, click Edit.
The Keypanels / Ports Configuration screen appears.
3.
Verify you are on the Setup screen.
4.
Under Setup Page Options, select the Setup Restriction checkbox.
5.
Click OK.
The Keypanels / Ports Configuration screen closes after recording the changes made.
6.
From the Edit menu, select Copy.
The entire setup for the selected intercom port is copied.
7.
From the Edit menu, select Paste Special.
This opens the Paste Special screen, where you can select items you want to paste to the other intercom
ports.
Note: By default, all items in the Paste Special screen are checked.
8.
Click Clear All.
All the check boxes are deselected
9.
Under Miscellaneous, select Setup Restrict.
10. Under Destination, select All Ports.
11. Click Paste.
The Paste Special screen closes. On the Keypanels / Ports screen, the setup restrict icon has appeared for
all ports.
26
Telex Communications
Hide quick links:
Advertisement
Table of Contents
