Removing The Lower Triple Clamp (250 Exc-F Eu); Removing The Lower Triple Clamp (250 Xcf-W Usa) - KTM 250 XCF-W USA 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the lower triple clamp
11.32
Removing the lower triple clamp
11.33
(250 EXC-F EU)
x
–
Remove the fork legs. (
–
Remove the headlight mask with the headlight. (
–
Dismount the front fender. (
–
Remove screws
Info
Do not unplug the CDI control unit.
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
500149-10
Do not bend the cables and lines.
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
500150-10
(250 XCF‑W USA)
x
–
Remove the fork legs. (
–
Dismount the start number plate. (
–
Dismount the front fender. (
–
Remove screws
Info
Do not unplug the CDI control unit.
–
Remove screw
bar and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
500099-10
Do not bend the cables and lines.
–
Remove O-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
500100-10
p. 42)
p. 47)
and hang the CDI control unit to the side.

. Loosen screw . Take off top triple clamp with the handlebar
 
.

p. 42)
p. 48)
p. 47)
and hang the CDI control unit to the side.

. Remove screw , take off the top triple clamp with the handle-
 
. Remove protector ring
 
p. 47)
.
44