Setting The Clock; Adjusting The Speedometer Functions - KTM 250 XCF-W USA 2010 Owner's Manual

CONTROLS

Setting the clock

6.5

Adjusting the speedometer functions

6.6
Info
Upon delivery, only the SPEED/H and SPEED/ODO display modes are activated.
–
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
Condition
The motorcycle is standing.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
400330-01 the button
Info
The seconds can only be set to zero.
–
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
Condition
The motorcycle is standing.
–
Press the button
display.
–
Press the button
The Setup menu opens and the active functions are displayed.
–
Switch to the function you require by briefly pressing the button
The selected function flashes.
Activating a function
–
Press the button
400318-01
The icon remains in the display and the display changes to the next func-
tion.
Deactivating a function
–
Press the button
The icon disappears from the display and the display changes to the next
function.
–
Activate or deactivate all functions accordingly.
–
Press the button
The settings are saved and the Setup menu closed.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
for 3 - 5 seconds.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
.
.
for 3 - 5 seconds.
14
.
.