Installing The Lower Triple Clamp (250 Exc-F Eu) - KTM 250 XCF-W USA 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
Installing the lower triple clamp
11.34
2 0 0 2
1 0 0 1
(250 EXC-F EU)
x
–
Clean the bearing and sealing elements, check for damage, and grease.
Long-life grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check whether the top steering head seal
–
Push on protective ring
500151-10
–
Position the upper triple clamp with the steering.
–
Mount and tighten screw
Guideline
Screw, top steering head
–
Position the clutch line, wiring harness and CDI control unit. Mount and tighten
screws .

Guideline
Remaining screws, chassis
500149-11
–
Install the front fender. (
–
Refit the headlight mask with the headlight. (
–
Install the fork legs.
–
Tighten screw
Guideline
Screw, top steering stem
–
Check the cable harness, cable, brake and clutch line for free movement and free
laying.
–
Check the steering head bearing play. (
100022-11
p. 104)
.

.

M20x1.5
M6
p. 47)
( p. 42)
x
.

M8
p. 40)
is correctly positioned.

10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 47)
20 Nm
(14.8 lbf ft)
45