Settings - Samsung NV7B667 Series User & Installation Manual

Operations
CAUTION
Do not cancel descaling in the process. Otherwise, you must restart the
•
descaling cycle and complete within the next three hours in order to enable
steam assisted modes.
To avoid accidents, keep children away from the oven.
•
• For the mixture ratio of water and the descaling agent, follow the agent
manufacturer's instruction as it precedes.
Drain
After using the steam assisted modes, you must drain the remaining water to
prevent affecting other cooking modes. Also, if you want to drain again for
cleaning purposes, use this function.
Touch the button on the control panel.
1.
Select Cleaning, and then press the Dial Knob.
2.
Select Drain, and then press the Dial Knob.
3.
Select Start, and then press the Dial Knob.
4.
Follow the instruction on the screen, select OK, and then press the Dial Knob.
5.
The oven drains water from the steam generator to the water reservoir.
•
When draining is complete, empty the water reservoir.
6.
After emptying the reservoir, clean it before putting it back to the oven.
•
WARNING
Wear oven gloves when you handle the water reservoir.
•
Do not remove the water reservoir while draining.
•
NOTE
Once the oven starts draining, please wait until the draining cycle is complete.
•
Depending on the product's environment, the drain operation may take a long
•
time. It's not a product malfunction, it's for safety, so wait for the water to cool
down.
34 English

Settings

Touch the button on the control panel, select Settings, and then press the Dial
Knob to change various settings for your oven. Please refer to the following table
for detailed descriptions.
Menu Submenu
Wi-Fi You can turn the Wi-Fi on or off.
You can connect the oven to the SmartThings
server via a Wi-Fi connection. When the oven
Easy Connection is connected, you can use the SmartThings app
to check the status of the oven and/or control
Connections
it from a mobile device.
Select Activate, and then press the Dial Knob
Remote
to allow the Call Centre to access your oven
management
remotely to check internal information.
You can change the brightness of the display
Brightness
screen.
You can turn the screen saver on or off.
Screen saver
The Screen saver is a function that displays
the date and time on your screen if there is no
input for a certain time in standby status.
Clock theme You can select the clock theme.
Display
You can set the length of time before the
screen saver turns on.
•
Timeout
•
Description
NOTE
NOTE
Energy consumption may increase
depending on your setting.
When the timeout setting is set to
"Always on", the brightness of the LCD
automatically changes to level 2 if there is
no action for 3 minutes.