Metallurgical Pulsing (Khz Pulsing) - EWM Tetrix 352 Synergic Operating Instructions Manual

Pulse time setting
Pulse pause setting
Pulse edge setting
The and
5.4.5.3

Metallurgical pulsing (kHz pulsing)

Metallurgical pulsing (kHz pulsing) uses the plasma force (arc force) occurring at high currents which al-
lows you to achieve a constricted arc with concentrated heat input. Unlike thermal pulsing, no times are
set; a frequency
slope and down-slope phase.
099-000141-EW501
22.03.2023
pulse edges can be set in the Expert menu (TIG) > see 5.4.8 chapter.
and the balance
Figure 5-34
Figure 5-35
are set instead. The pulsing process also occurs during the up-
Figure 5-36
Design and function
Welding task selection
51