Powering Up; Operating Voltage And Frequency; Connection To Mains Power - Coemar LEDko EXT + User Manual

5

. Powering up

5.1

Operating voltage and frequency

The unit may operates at voltages ranges from 90 to 230 V at a frequency of 50 or 60 Hz. It is
not needed to effect any setup procedures: LEDko EXT + will automatically adjust its operation
to suit any frequency or voltage within this range.
5.2

Connection to mains power

Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International
standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities
must be used exclusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested to 2 KV,
operating temperature -40°C + 180°C, Coemar cod. CV5311).
Connection to mains power
LEDko EXT + is equipped with two power connectors, one as input and one as output, which can
be used to feed up to 8 (at 230 V) or 4 (at 115 V) fixtures.
The max absorption of LEDko EXT + is reported in the following table:
- 230 V 0.92 A constant during normal exercise.
- 115 V 1.83 constant during normal exercise.
brown
blue
yellow/green
17
fase
neutral
mass