Resetting Analog Modules To Factory Settings - Siemens SIMATIC ET 200AL System Manual

Distributed i/o system

Hide thumbs Also See for SIMATIC ET 200AL:

Table of Contents

Supported functions

7.1 Calibrating analog modules

Resetting analog modules to factory settings

● You have opened the "Online & Diagnostics" view for the selected analog module from

the shortcut menu of the project and you are now in the "Functions > Calibration" area.

● The associated CPU is online.

Proceed as follows to reset the channel of an analog module to factory settings:

1. In the overview table, select the line of the channel to be calibrated.

2. Click the "Set to factory settings" button.

The factory settings of the channel are restored.

When you reset the current channel to the factory settings, the original calibration values that

were saved in the delivery state of the module become effective once again. Any existing

user calibration values of this channel are lost. You cannot restore these user calibration

Analog value processing

Function Manual, 06/2014, A5E03461439-AC

Table of Contents