Table of Contents
Advertisement
Artisan Mini Deck Oven | Installation and Operation Manual
3.
Installation
3.1.
Safety messages
WARNING
CAUTION
Figure 3.1:
Example of an RCD Power Socket.
5
An electrical socket must be protected by a 30mA-rated Type 'A' Residual
Current Device (RCD) before installation and commissioning of the oven.
There should always be a local disconnection switch for any person to
isolate the electrical power in an emergency. The disconnection switch
must be visible, labelled as an emergency shutdown device, and easily
accessible.
Check the electrical requirements on the oven's information plate before
plugging in the power cable and turning the power on for the first time.
Contact MONO Equipment if the electrical ratings are incorrect for your site.
Before installation, it is recommended that a qualified and competent
electrician tests the electrical outlet (power socket) for electrical safety.
Always ensure your hands are dry before touching any electrical
components, including cables, switches, and plugs.
This equipment is too heavy for a single person to lift.
Do not cover the air vents on the sides of the oven.
MONO
Chapter 3
Rev. A23 (Aug 2023)
Advertisement
Table of Contents
