Connector Defi Nitions; Atx Power Connector; Auxiliary Power Connector; Processor Power Connector - Supero SuperServer 6025B-8 User Manual

S S
UPER ERVER 6025B-T/6025B-8 User's Manual
5-8 Connector Defi nitions

ATX Power Connector

The primary ATX power supply con-
nector meets the SSI (Superset ATX)
24-pin specifi cation. Make sure that
the orientation of the connector is
correct. See the table on the right for
pin defi nitions.

Auxiliary Power Connector

In addition to the Primary ATX power
connector (above), the Auxiliary 4-pin
connector at JPW2 must also be con-
nected to your power supply. See the
table on the right for pin defi nitions.

Processor Power Connector

JPW3 must also be connected to the
power supply to provide power for the
processor(s). See the table on the
right for pin defi nitions.

NMI Button

The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.

Power LED

The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin defi nitions.
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
+12V 4-pin Aux. Power
Pin Defi nitions (JPW2)
Pins Defi nition
1 & 2 Ground
3 & 4 +12V
Processor Power
Pin Defi nitions (JPW3)
Pins
1 through 4
5 through 8
NMI Button
Pin Defi nitions (JF1)
Pin# Defi nition
19 Control
20 Ground
Power LED
Pin Defi nitions (JF1)
Pin# Defi nition
15 Vcc
16 Control
5-12
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Defi nition
Ground
+12V