Drive Bay Installation/Removal; Accessing The Drive Bays - Supero SuperServer 6025B-8 User Manual

S S
UPER ERVER 6025B-T/6025B-8 User's Manual
Cover Release Buttons
Serverboard
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

SATA/SCSI Drives: You do not need to access the inside of the chassis or re-
move power to replace or swap SATA/SCSI drives. Proceed to the next step for
instructions. Note: You must use standard SATA/SCSI drives in the SuperServer
6025B-T/6025B-8.
DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive bay, proceed
to the "5.25" Drive Bay Installation" section later in this chapter for instructions.
Figure 6-2. System Cooling Fans
Chassis Cover (removed)
System Cooling Fans
6-4
System Memory
Power Supply