Table of Contents
Advertisement
2.5.
Power supply output
The red power supply output
external source and has a different assignment, depending on the position of dip switch 1
(of 8 dips):
Dip
Function
Dip 1 ON
+12V (max. 3A) when reverse gear is engaged plus 10 seconds delay
after reverse gear is disengaged and
+12V when manually switched to front camera by keypad (short press)
Dip 1 OFF
+12V permanent (max. 3A) ACC
Version 21.03.2022
ACC/front cam out 12V (max 3A)
HW:CAM (V100)/(V42,V43,V44)
can be used to power an
CI-RL4-C3D
Advertisement
Table of Contents
