Table of Contents
Advertisement
2.3.2. Connection to the head unit – Power / CAN
Connect the power / CAN cable's female 10pin connector to the 10pin connector of the
video interface.
Connect the interface cable's female 12pin connector to the 12pin connector of the
video intzerface.
Connect the single purple colored cable
stabile
+12V S-contact terminal 86s
Version 02.02.2018
Disconnect the female PSA Quadlock connector at the
rearside of the head unit and click out the green female
22pin connector of the female PSA Quadlock connector.
Connect the singel four cables of the POWER / CAN cable
to the green female PSA Quadlock connector as shown:
„BATT"
to the first thick green cable
„GND"
to the second thick green/yellow cable
„CAN-HIGH"
to the yellow cable beside Ground
„CAN-LOW"
to the grey cable below
„Manual ACC"
of the video interface cable to
(e.g. glove compartment illumination).
HW:CAM-GD (V94)
RL3-NAC
Advertisement
Table of Contents
