Table of Contents
Advertisement
2.5.
Analog power supply for the video interface
If, after connecting the PNP harness, no interface LED lightens up while the ignition is
turned on, the single red wire
ACC-out (max 3A)
and the purple coloured wire
Manual ACC
of the 12pin interface cable both have to be connected additionately to
S-contact terminal 86s +12V
(e.g. glove compartment illumination).
Version 16.03.2022
HW:CAM(V100)/(V33)
CI-RL4-MIB
Advertisement
Table of Contents
