6 Setup
Simulation
36
With the two keys you can select the requested switching delay ac-
cording to the following illustration.
The switching delay can be adjusted in seven steps between 100 ms
and 20 s.
100
ms
Fig. 33: Adjust switching delay - LED indication flashes
If the indication moves to the right, the switching delay will be longer,
to the left shorter.
The indication returns automatically to the indication of the actual
receive level after approximately 10 s.
If possible, simulate a filling between emitting and receiving unit
with your hand or a metal sheet and check if the switching point is
adjusted correctly. If the control lamp changes its switching status, the
switching function is correct
200
500
1 s 2 s 5 s 20 s
ms
ms
VEGAMIP R62 • Receiving unit