Vega VEGAMIP R62 Operating Instructions Manual page 29

Wiring plan - processing
unit
Connection - PNP action
VEGAMIP R62 • Receiving unit
Fig. 25: The electronics is located in the housing of the processing unit
We recommend connecting VEGAMIP 62 in such a way that the
switching circuit is open when there is a level signal, line break or
failure (safe state).
The terminals 1 and 5 as well as 2 and 8 are internally connected.
Hence PNP or NPN action can be selected through the electrical
connection.
1
Fig. 26: Wiring plan processing unit - VEGAMIP 62 (receiver) - PNP action
1 Voltage supply
2 Load
5 Connecting to power supply
2
29