Table of Contents
Advertisement
High process tempera-
tures
VEGAMIP R62 • Receiving unit
Fig. 13: VEGAMIP 62 with ceramic mounting adapter "Abrasion protection"
-40 ... +80 °C (-40 ... +176 °C)
As an alternative you can install the VEGAMIP 62 in front of a suitable
window. In such case, use a respectively resistant window material.
With high process temperatures above 80 °C, you have to use a "high
temperature" mounting adapter for the emitting and receiving unit.
It is mounted onto the thread of VEGAMIP 62.
The "high temperature" mounting adapter is available in two tempera-
ture stages.
•
-40 ... +250 °C (-40 ... +482 °F), length x: 150 mm (5.9 in)
•
-40 ... +450 °C (-40 ... +842 °F), length x: 300 mm (11.8 in)
The mounting adapter "High temperature" can only be used with the
threaded version (internal horn antenna with PTFE cover)
Fig. 14: VEGAMIP 62 with mounting adapter "High temperature" -40 ... +450 °C
(-40 ... +842 °F)
x
Length: Mounting adapter "High temperature"
As an option, the "high temperature" mounting adapter can be also
equipped with an extension for front-flush mounting. Thus the instru-
ment can also be mounted into long sockets where there is danger of
buildup in the socket. The extension is available in five lengths: 40, 60,
80, 100 and 150 mm (1.57, 2.36, 3.15, 3.94, 5.91 in).
4 Mounting
x
19
Advertisement
Table of Contents
