Candy CI642SCBB Manual page 13

4. Beware of hot surfaces
"H" will show which means cooking zone is too hot to touch. It
will disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if you
want to heat further pans, use the hotplate that is still hot.
Using the Power Management
It is possible to set a maximum power absorption level for the induction hob, choosing
up to different power ranges.
Induction hobs are able to limit themselves automatically in order to work at lower
power level, to avoid the risk of overloading.
To enter the power management function
Turn on the hob, then press at the same time the timer control and key lock. The timer
indicator will show "P5" which means power level 5. The default mode is on 7.2Kw.
To switch to another level
Select a power level by touching the slider control. There are 5 power levels, from "P1"
to "P5". The timer indicator will show one of them.
"P1": the maximum power is 2.5 Kw.
"P2": the maximum power is 3.5 Kw.
"P3": the maximum power is 4.5 Kw.
"P4": the maximum power is 5.5 Kw.
"P5": the maximum power is 7.2 Kw.
Confirmation and Exit Power Management Function
Press at the same time the timer control and key lock for confirmation, then the hob will
be turned off.
13