13.3.16 Setting The System Date And Time - DPS Telecom NetGuardian 420 DNP3 Hardware User Manual

78

13.3.16 Setting the System Date and Time

The current date and time can be entered from the Date and Time screen or from an SNMP manager
The date is entered in the mm/dd/yyyy format and the time is entered in the hh:mm:ss format.
!
Hot Tip!
The date and time can also be set from an SNMP manager.
Use the following steps to manually set the system's time and date:
1. From the menu, select , see Figure 2.31.
Edit Date and Time
2. Enter the appropriate date, the day of the week, and time.
3. Click to save the data and time settings.
Submit Data
The date and time will need resetting following a power failure or reboot unless your NetGuardian is
equipped with the real-time clock option or network time is enabled.