Table of Contents
Advertisement
28
11. Reboot to save the new configuration to the NetGuardian.
12. Now you can connect to the NetGuardian via LAN and use the Web Browser Interface to complete the
configuration.
RADIUS logons are case-sensitive. If the RADIUS server is unavailable or access is denied, the
master password will work for craft port access only. Also, the "dictionary.dps" files (included on the Resource
Disk) needs to be loaded on the RADIUS server for access-right definition. If RADIUS is enabled on the
NetGuardian, local authentication will not be valid.
12.1.2
Edit PPP Port
Choose P)PP to edit your baud rate, depending on what device has been chose for the PPP port.
If you are using a modem for the PPP port, then choose mo(D)emto define the modem initialization strings.
Choose B)aud to define the baud rate for that port.
Edit your PPP port
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 DNP3 and is the answer not in the manual?
Questions and answers