Viewing Live Target Pings - DPS Telecom NetGuardian 420 DNP3 Hardware User Manual

Reference
Point Description
Point Status
Event Threshold
Accumulated Time
Accumulated Since
Reset Accumulation
Timer
12.2.2

Viewing Live Target Pings

Choose P)ing to ping any of the NetGuardian's user defined IP addresses. Then enter the ID number (1-32) of the
IP address or enter any IP address to ping.
Continuously ping an IP address that has been defined in the NetGuardian's ping table
The user-defined description of the monitored alarm point.
The current status of the monitored point.
Amount of time allowed to accumulate before the system alarm,
"Accumulation Event" is triggered. Note: Maximum is 45 days.
The total time the monitored point has been in an ALARM state.
Indicates the last time the accumulation timer was reset.
Selecting this option will reset the timer.
Field descriptions in the Accumulator Timer Settings
39