Table of Contents
Advertisement
13.3.5
Configuring Ports
You'll configure your unit's modem and terminal server ports from the Edit menu > Ports screen.
13.3.5.1
Modem Settings
To configure your NetGuardian for PPP or Dial-up access, you may need to enter information in the Modem fields
on the Ports screen.
To configure the modem port settings.
1. In the
field enter the number of rings before answering. (Default = 1)
Ring Count
2. The
and the
Dial Init
For example, the modem can be set to ignore the dial-tone by entering a character code in either the Answer
Init (into the NetGuardian) or the Dial Init (out from the NetGuardian).
3. Click
to save your modem port settings.
Submit Data
Change the modem settings from the Edit menu > Ports screen
fields can be used if any other modem initialization settings need to be set.
Answer Init
55
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 DNP3 and is the answer not in the manual?
Questions and answers