13.3.6.4
Text Paging Setup
Text pages can receive information including the point addresses of alarms, the alarm description, time of the
alarm, and state (alarm or clear). The text pages may be viewed using a terminal such as HyperTerminal.
Use the following steps to configure the text paging settings:
1. Under the
column select
Type
2. Enter the phone number of the text paging device under the
3. Set the pager data rate (i.e. 300, 1200, 2400 or 9600). The default baud is 1,200.
4. Select a pager word format (e.g Data bits: 7 or 8, Parity: none (N), even (E) or odd (O), and Stop Bits: 1).
The default setting is 7, Even,1.
To set up text paging from T/Mon see the T/Mon user manual.
13.3.6.5
Email Notification Setup
The email pager provides alarm notification via email, with a description similar to that of the alpha-numeric pager.
1. Use the following steps to configure the email notification settings:
2. Under the
column, select Email from the drop-down menu.
Type
3. Enter the domain name of the email address under the
address after the
symbol in
@
Note: There cannot be any spaces in the domain name.
4. Enter the email recipient's user name under the
before the @ symbol in the
Note: There cannot be any spaces in the recipient's user name
5. Enter the IP address of the SMTP mail server in the
6. Click
to save your email notification settings.
Submit Data
7. Click on the
link. If you have not done so, set up the "from" address sent in email messages sent from
System
the NetGuardian by entering the appropriate information in the
notification from the NetGuardian will appear as follows:
!
Hot Tip!
Most email programs can be set to perform a certain action if a message is received from a specified address,
such as moving the message to a special Alarms folder. Use the address entered in the
purposes.
8.
Click
Submit Data
The "from" email address is for identification purposes. It is not necessarily a real email address that can
from the drop-down menu.
Text
Email notification from the NetGuardian
name@domain.com
name@domain.com.
to save your new system information settings.
Phone/Domain
heading. This is the portion of an email
Phone/Domain
.
heading. This is the portion of an email address
PIN/Rcpt/Port
field.
IPA
and
Name
name@location
heading.
fields. The email
Location
.
screen for such
Systems
61
Need help?
Do you have a question about the NetGuardian 420 DNP3 and is the answer not in the manual?
Questions and answers