Rinnai RHFE 952 ETRN Operation & Installation Manual page 34

BURNER MEDIA INSTALLATION
RHFE 1253 burner bed
Log fitting sequence
1. Back left log
Align bottom locating holes with the locating
pins at the back of the burner - the log will sit
up against the back of the combustion chamber.
3. Front left small log
Refer fully assembled image for reference.
Place onto the middle left locating pin and left
front locator bracket.
5. Front middle small log
Refer fully assembled image for reference.
Place onto the middle locating pin and central
front locator bracket.
Rinnai
2. Back right log
Align lower locating holes with pins at rear of
burner. The logs will rest on the back of the
combustion chamber, with a gap between them.
4. Front right small log
Refer fully assembled image for reference.
Place onto the middle right locating pin and right
front locator bracket.
6. Front large left log
Place onto the locating pin of the first log and
slot onto the left front locating bracket.
34
2
10
RHFE 952/1253 OIM