System Operation - Hyundai Elantra 2024 Owner's Manual

System operation

Ventilation
1. Select the Face Level
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the desired
speed.
Heating
1. Select the Floor Level
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the desired
speed.
5. If desired, turn the air conditioning ON
with the temperature control knob set
to heat in order to dehumidify the air
before it enters into the cabin.
If the windshield fogs up, select the Front
& Defrost mode or press the Front
Defrost mode.
Operation Tips
• When starting the vehicle in cold
weather a more efficient way to heat
the passenger compartment is to do
the following:
- Turn off or lower the blower right
after starting the engine.
- If the engine temperature is still low
and the air flow from the heater is still
cold, after a few minutes of engine
warm up, turn on or set the fan speed
to a higher level and adjust the
temperature setting to hot.
• To help keep dust or unpleasant fumes
mode.
• To help prevent interior fog on the
mode.
Air conditioning
HYUNDAI Air Conditioning Systems are
filled with R-1234yf refrigerant.
1. Start the engine. Press the air
2. Select the Face Level
3. Set the air intake control to the outside
4. Adjust the fan speed control and
NOTICE
When using the air conditioning system,
monitor the temperature gauge closely
while driving up hills or in heavy traffic
when outside temperatures are high. Air
conditioning system operation may cause
engine overheating. Continue to use the
blower fan but turn the air conditioning
system off if the temperature gauge
indicates engine overheating.
from entering the vehicle through the
ventilation system, temporarily set the
air intake control to the recirculation
mode. Be sure to return the control to
fresh mode position when the irritation
has passed to keep fresh air in the
vehicle. This can help keep the driver
alert and comfortable.
windshield, set the air intake control to
the fresh air position and the fan speed
to the desired position, turn on the air
conditioning system, and adjust the
temperature control to desired
temperature.
conditioning button.
air or recirculated air position.
temperature control as desired.
5
mode.
5-85