Hyundai Elantra 2024 Owner's Manual page 487

Tail light/Stop light (Inner lamp)
(Bulb type)
1. Turn off the engine.
2. Open the trunk.
3. Loosen the retaining screw of the trunk
lid cover and then remove the cover.
4. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly. Pull the bulb
out of the socket.
OCN7080040
5. Insert a new bulb by inserting it into the
socket.
6.Reinstall the trunk lid cover by pushing
in the screw.
Reverse light (Inner lamp) (Bulb
type)
1. Disconnect the connector and then
remove the nuts by turning the nuts
counter clockwise.
2. Take the light assembly out.
3. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly. Pull the bulb
out of the socket.
OCN7080053
4. Insert a new bulb by inserting it into the
socket.
5. Install the light assembly to the trunk.
6. Reinstall the trunk lid cover by pushing
in the screw.
Stop/Tail light/Rear side marker
(LED type)
If the LED light does not operate, contact
an authorized HYUNDAI dealer for
replacement.
The LED light cannot be replaced as a
single unit. A skilled technician should
check or repair the LED light, for it may
damage related parts of the vehicle.
9
9-59