Hyundai Elantra 2024 Owner's Manual page 127

Remotely starting the vehicle (5)
if equipped
To start the vehicle remotely:
1. Press the door lock button on the smart
key. You must be within about 32 ft. (10
m) from the vehicle.
2. Press and hold the Remote Start button
(7) on your smart key for more than 2
seconds. You must press the button
within 4 seconds from when you have
pressed the door lock button. The
hazard warning lights blink and the
engine starts.
3. To turn off the engine, press the
Remote Start button (7) once.
Information
• In case of the manual operation, the
climate control system will be
maintained even when the engine is
turned OFF. However, the automatic
operation is set to 72 °F (22 °C).The
climate control system remain set
before the engine is turned OFF.
• The engine turns off if you do not get on
the vehicle within 10 minutes after
remotely starting the vehicle.
• The Remote Start button may not
operate if the smart key is not within 32
ft. (10 m) from the vehicle.
• The vehicle does not remotely start if
the hood or trunk is open.
• Do not idle the engine for a long time.
Starting the vehicle
Some models are equipped with a Button
Start ignition switch instead of a key
cylinder. You can leave your smart key in
your pocket or purse when you start your
vehicle.
For more information, refer to the "Push
button start ignition switch" section in
chapter 6.
Information
If the smart key is not moved for some
time, the detection function for smart key
operation will pause. Lift the smart key to
activate the detection again.
NOTICE
To prevent damaging the smart key:
• Keep the smart key in a cool, dry place
to avoid damage or malfunction.
Exposure to moisture or high
temperature may cause the internal
circuit of the smart key to malfunction.
This may not be covered under
warranty.
• Avoid dropping or throwing the smart
key.
• Protect the smart key from extreme
temperatures.
5
5-11