Cluster Display Messages - Hyundai Elantra 2024 Owner's Manual

Information
If the Icy Road warning light appears
while driving, avoid speeding, rapid
acceleration, sudden braking, or sharp
turning.

Cluster display messages

Shift to P (with smart key)
if equipped
This message appears if the Push Button
Start ignition switch is pressed to the OFF
position without the gear in the P (Park)
position.
If this occurs, the Push Button Start
ignition switch goes to the ACC position.
Low key battery (with smart key)
if equipped
When the Push Button Start ignition
switch is pressed to the OFF position, a
message may appear, indicating the
internal battery of the Smart Key is low.
Replace the Smart Key battery.
Press brake pedal to start engine
(with smart key)
if equipped
This message appears if the Push Button
Start ignition switch is pressed repeatedly
without depressing the brake pedal.
Start the vehicle by depressing the brake
pedal and then pressing the Push Button
Start ignition switch.
Key not in vehicle (with smart key)
if equipped
This warning message is displayed if the
smart key is not in the vehicle when you
press the Engine Start/Stop button.
When attempting to start the vehicle,
always have the smart key with you.
Key not detected (with smart key)
if equipped
This message appears if the smart key is
not detected when you press the Push
Button Start ignition switch.
Press START button again (with
smart key)
if equipped
If you cannot start the vehicle after the
Push Button Start ignition switch is
pressed, attempt to start the engine by
pressing the Push Button Start ignition
switch again.
If the warning message appears each
time you press the Push Button Start
ignition switch, have the vehicle
inspected by an authorized HYUNDAI
dealer.
Press START button with key (with
smart key)
if equipped
This message appears and the
immobilizer indicator blinks if you press
the Push Button Start ignition switch
while the warning message, "Key not
detected" appears.
Check BRAKE SWITCH fuse (with
smart key)
if equipped
This message appears if the brake switch
fuse is disconnected.
Replace the fuse before starting the
engine.
If that is not possible, start the engine by
pressing the Engine Start/ Stop button for
10 seconds in the ACC position.
4
4-19