System Operation - Hyundai i10 Owner's Manual

Convenience features

System operation

Ventilation
1. Select the Face Level
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Select the Floor Level
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If desired, turn the air conditioning
ON with the temperature control
knob set to heat in order to dehumid-
ify the air before it enters into the
cabin.
If the windscreen fogs up, select the
Floor & Defrost
Front Defrost
Operation Tips
• To keep dust or unpleasant fumes
from entering the vehicle through the
ventilation system, temporarily set
the air intake control to the recircula-
tion mode. Be sure to return the con-
trol to fresh mode position when the
irritation has passed to keep fresh air
in the vehicle. This will help keep the
driver alert and comfortable.
5-56
mode.
mode.
mode or press the
mode.
• To prevent interior fog on the wind-
screen, set the air intake control to
fresh mode and fan speed to the
desired position, turn on the air condi-
tioning system, and adjust the tem-
perature control to desired tempera-
ture.
Air conditioning
HYUNDAI Air Conditioning Systems
are filled with R-134a or R1234yf refrig-
erant.
1. Start the engine.
2. Push the air conditioning button.
3. Select the Face Level
4. Set the air intake
Recirculation mode temporarily to
allow the cabin to cool quickly. When
the desired temperature in the cabin
is reached, change the air intake
control back to Fresh mode.
5. Adjust the fan speed control and
temperature control to maintain
maximum comfort.
NOTICE
• The refrigerant system should
only be serviced by trained and
certified technicians to insure
proper and safe operation.
• The refrigerant system should be
serviced in a well-ventilated place.
mode.
control to