Hyundai Elantra 2024 Owner's Manual page 368

Driver assistance system
• Navigation-based Smart Cruise Control
may not operate depending on the
configuration of vehicles detected
ahead on the road.
• When you are towing a trailer or
another vehicle, turn off
Navigation-based Smart Cruise
Control.
• After you pass through a tollbooth on a
highway, Navigation-based Smart
Cruise Control operates based on the
outermost lane. If you enter one of the
other lanes, Navigation-based Smart
Cruise Control may not operate
properly.
• Your vehicle accelerates if you depress
the accelerator pedal while
Navigation-based Smart Cruise Control
is operating. If the accelerator pedal is
not depressed far enough, your vehicle
may decelerate.
• If you accelerate and release the
accelerator pedal while
Navigation-based Smart Cruise Control
is operating, your vehicle may not
decelerate sufficiently or may rapidly
decelerate.
• If the curve is too sharp or if it is a slight
curve, Navigation-based Smart Cruise
Control may not operate.
7-86
Information
• There may be a gap in time between the
navigation system's guidance and
when the Navigation-based Smart
Cruise Control operation starts and
ends.
• The speed information on the
instrument cluster may differ from the
navigation system.
• Even if you are driving at a speed lower
than the Smart Cruise Control's set
speed, acceleration may be limited by
the curves ahead on the road.
• If Navigation-based Smart Cruise
Control is operating while leaving the
highway and entering an interchange,
junction, or rest area, the function may
continue to operate for a while.
• Deceleration by Navigation-based
Smart Cruise Control may not feel
sufficient due to the road conditions
such as uneven road surfaces or narrow
lanes.