Hyundai Elantra 2024 Owner's Manual page 357

Table of Contents

Advertisement

Collision Warning
OCN7073154L
While Smart Cruise Control is operating
and the collision risk of the vehicle ahead
is high, the "Collision Warning" warning
message may appear on the instrument
cluster, and an audible alert sounds.
WARNING
Smart Cruise Control may not warn you of
a collision if:
• The distance to the vehicle ahead is
close, or the speed of the vehicle ahead
is faster or similar to your vehicle.
• The speed of the vehicle ahead is very
slow or the vehicle is stopped.
• The accelerator pedal is depressed
right after Smart Cruise Control is
turned on.
Always maintain a safe distance from the
vehicles ahead and adjust your vehicle
speed to the road conditions.
WARNING
Smart Cruise Control is not a substitute
for proper and safe driving.
To prevent serious injury or death:
• Always maintain a safe distance from
the vehicles ahead and adjust your
vehicle speed to the road conditions.
Smart Cruise Control may not
recognize unexpected and sudden
situations or complex driving
situations.
• Keep Smart Cruise Control off when not
in use to avoid inadvertently setting the
speed.
• Do not open the door or leave your
vehicle when Smart Cruise Control is
operating, even if your vehicle is
stopped.
• Always check the vehicle speed and
distance to the front vehicle that have
been selected.
• Keep a safe distance depending on the
road condition and vehicle speed. If the
distance to the front vehicle is too close
while driving at high speeds, it may
cause a serious collision.
• When maintaining distance from the
vehicle ahead, if the front vehicle is no
longer detected, Smart Cruise Control
may suddenly accelerate to the set
speed.
• The vehicle speed may slow down or
speed up while driving uphill or
downhill.
• Always be aware of situations such as
when a vehicle cuts in suddenly.
• When you are towing a trailer or
another vehicle, turn off Smart Cruise
Control.
• Turn off Smart Cruise Control when
your vehicle is being towed.
• Smart Cruise Control may not operate
normally if there is interference from
strong electromagnetic waves.
7
7-75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents