Product Description; Unpacking Check; Servo Drive Model Introduction; Drive Name Plate Description - Moons' M2DV-1D82D User Manual

M Series AC Servo
User Manual

2. Product Description

2.1 Unpacking Check

Please refer to this section to confirm the model of servo drive and servo motor .
A complete and workable AC servo system should include the following parts:
1. Matched Servo drive and Servo motor
2. A power cable connect the drive to the servo motor(Optional)
3. An feedback encoder cable connect the drive to the motor (Optional)
4. A mini USB cable connect the port CN1 to PC for communication.(Optional)
5. 50-PIN connector (For I/O connections, Port CN2) (Optional)
6. 26-PIN connector(For encoder feedback, Port CN3 ) (Optional)
7. 6-PIN connector(IEEE1394, Port CN4, Port CN5)(Optional)
8. RJ-45 connectors (For RS-485 or CANopen communication, Port CN6 and CN7)(Optional)
9. 5-PIN connector (For L1,L2,L3,L1C,L2C)
10. 6-PIN connector(For U,V,W,B1+,B2,B3)

2.2 Servo Drive Model Introduction

2.2.1 Drive Name Plate Description

Model No.
Input/Output Voltage
Rated Current
Frequency
Rated Power
Rev. 1.1
9/13/2021
M2
Model No. XXXX-XXXXX
Phase
Designed in California by
Assembled in China
AC SERVO
DRIVE
INPUT OUTPUT
VOLT.
200-240VAC 0-240VAC
PHASE
φ φ
1 /3
F.L.C
2.6 A/1.5A 1.8 A
FREQ.
50/60Hz 0-400Hz
POWER
200W
10
RoHS
Serial No.
09450001
3φ
400-820-9661