Hayward OmniPL HLBPRO4SW Operation Manual page 29

Themes allow you to execute many pool functions with just one button. This can be handy for
functions that require interaction with various pool equipment. For example, spending an evening
in the spa might require you to turn on the spa jets, set the heater to 104ºF, and turn on the spa
lighting. Rather than manually performing these functions, they can be saved as a Theme and
executed with just one button. To create a Theme, put all of the equipment into the desired state.
In the example above, you would set all the equipment as described. When creating Themes,
the OmniPL takes a "snapshot" of the system state/settings. This snapshot is saved as a Theme.
Refer to the following diagrams and information for creating and running Themes.
82
F
º
71º F
air
Edit Theme - After selecting
a Theme, touch this button
to edit the Theme. You can
rename, change icon and set
as favorite.
Select Theme - Touch
this button to select
the desired Theme. You
can now turn it on/off,
edit, set a schedule, set
a countdown timer, or
delete the selection using
the buttons above.
Create a Theme
To create a Theme, put all of the equipment into the desired state and refer to the diagram on the
top of the next page.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Themes
heat/cool
themes
favorites
con g
Start Theme - After se-
lecting a Theme, touch this
button to start the Theme.
pool party
MANAGE
themes
pool party
MANAGE
themes
End Theme - After selecting a Theme,
touch this button to end the Theme.
OFF
Create a Theme - Touch
this button to create a
Theme. Before creating,
make sure all pool/spa/
backyard equipment is in
the desired state. NOTE: If
a Spa Side remote control
is configured, you'll have
the option to assign the
Theme to one of its but-
tons.
OFF
28