Configuring Your System - Epson Express Station Express Station Setup Manual

power cord, and wait 30 seconds before you remove the
cover. Only remove the cover to access internal
components.
the cover is off.
Now you are ready to turn on your system. Press the power
button on the computer's front panel. You may need to adjust
your monitor's brightness and contrast to get the best display.
Then read the next section for guidelines on running the
appropriate configuration program and installing software.

Configuring Your System

There are two programs you can use to configure your
computer: the BIOS SETUP program and the System
Configuration utility. Which one you use depends on the
option cards you may have installed in your computer.
You should use the BIOS SETUP program to configure your
computer in the following situations:
configuration (CFG) file.
You should run the System Configuration utility to configure
your system if either of the following is true:
14 Setup Guide