Table of Contents
Advertisement
13.6
Limiting the mains current consumption
If your mains fusing is below 16 A, the current consumption can be reduced in steps from 16 A to 8 A. The maximum
heating power is reduced correspondingly. Here, take into consideration whether other loads are connected to the same
fused circuit or whether your ECO thermostat is the only load.
By pressing
-
13.7
Entering the offset of the displayed temperature (calibration)
Deviations to the calibrated reference thermometers (e.g. LAUDA DigiCal) can be corrected internally by the "Off-
set" function.
09/2021
The adjacent menu window appears.
(ESC) you are returned to the menu level without any change.
Access to the main menu level is obtained by pressing the enter key
.
Selection and confirmation of
Basic
setup.
As well as
Curr.Consumpt.
Select
Curr.Consumpt.
with
Change the value with
Single figures can be selected by pressing
Confirm the input with the enter key
ECO Gold
Setup
the set value is displayed.
.
or
.
or
.
.
89 / 134
Advertisement
Table of Contents
