Safety And Security; Electrical Safety; Symbols; Security - ABB AquaMaster 3 FET200 User Manual

Electromagnetic flowmeter transmitter
Hide thumbs Also See for AquaMaster 3 FET200:
Table of Contents

Advertisement

AquaMaster 3 FET200
Electromagnetic flowmeter

1 Safety and Security

Information in this manual is intended only to assist our customers in the efficient operation of our
equipment. Use of this manual for any other purpose is specifically prohibited and its contents are not to be
reproduced in full or part without prior approval of the Technical Publications Department.

1.1 Electrical Safety

This equipment complies with the requirements of CEI/IEC 61010-1:2010 'Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use' and complies with US NEC 500 and
Occupational Safety & Health Administration.
If the equipment is used in a manner NOT specified by the Company, the protection provided by the
equipment may be impaired.

1.2 Symbols

One or more of the following symbols may appear on the equipment labelling:
Warning – Refer to the manual for
instructions
Caution – Risk of electric shock
Protective earth (ground) terminal
Earth (ground) terminal

1.3 Security

Important (note)
This product is designed to be connected to and to communicate information and data via a network
interface. It is your sole responsibility to provide and continuously ensure a secure connection between
the product and your network or any other net- work (as the case may be). You shall establish and
maintain any appropriate measures (such as but not limited to the installation of firewalls, application of
authentication measures, encryption of data and installation of antivirus programs) to protect the
product, the network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB Limited and its
affiliates are not liable for damages and/or losses related to such security breaches, any unauthorized
access, interference, intrusion, leakage and/or theft of data or information.
OI/FET200–EN Rev. N
Direct current supply only
Alternating current supply only
Both direct and alternating current supply
The equipment is protected
through double insulation
3

Advertisement

Table of Contents
loading

Table of Contents