Direction "a"
Throttle grip free play is increased.
Direction "b"
Throttle grip free play is decreased.
1
d. Tighten the locknut.
e. Slide the rubber covers to its original position.
EWA1MC1010
WARNING
After adjusting the throttle grip free play,
start the engine and turn the handlebars to
the right and to the left to ensure that this
does not cause the engine idling speed to
change.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
EAS1MC1047
CHECKING THE SWITCHES, LIGHTS AND
SIGNALS
1. Check that all switches operate and that all
lights come on.
Refer to "INSTRUMENT AND CONTROL
FUNCTIONS" in Owner's manual.
Faulty → Refer to "CHECKING THE
SWITCHES" on page 8-191 and "CHECK-
ING THE BULBS AND BULB SOCKETS" on
page 8-194.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
1. Adjust:
• Headlight beam (vertically)
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Turn the adjusting knobs "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
1
a
b
2
3
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
PERIODIC MAINTENANCE
b
▲
▲▲▲
▲ ▲▲▲
▲
2. Adjust:
• Headlight beam (horizontally)
▼
▼▼▼
▼ ▼▼▼
▼
a. Turn the adjusting screws "1" in direction "a"
or "b".
Left headlight
Direction "a"
Headlight beam moves to the left.
Direction "b"
Headlight beam moves to the right.
Right headlight
Direction "a"
▲▲▲
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
1
b
▲
▲▲▲
▲ ▲▲▲
▲
EAS21790
REPLACING THE HEADLIGHT BULBS
▼▼▼
The following procedure applies to both of the
headlight bulbs.
1. Remove:
• Right upper inner panel
• Left side cowling
Refer to "GENERAL CHASSIS" on page 4-1.
2. Disconnect:
• Headlight coupler "1"
3. Remove:
• Headlight bulb cover "2"
3-32
b
a
1
1
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
a
▲ ▲▲▲
▲
▲▲▲
▼ ▼▼▼
▼
▼▼▼
1
b
a
▲ ▲▲▲
▲
▲▲▲